(Item 8385)  Update DLUR BIND adaptive session pacing processing                
----------------------------------------------------------------                
Product testing for a migration scenario from NCP BF to DLUR BF                 
uncovered a discrepancy in the two BF's adaptive session pacing                 
processing.  Since customers require a seamless transition in moving            
devices from an NCP BF to a DLUR BF, the DLUR BF will be updated to             
match the NCP BF's processing.                                                  
                                                                                
In the APPN DLUR Architecture Reference, section 8.1.4 (BIND), the              
proposal is to change within the "adaptive session pacing processing"           
                                                                                
from:                                                                           
                                                                                
  - set the ASP indicator to the same value as the REX stage pacing             
    parameter (byte 4, bit 0) in the Assign LU Characteristics (X'30')          
    control vector included in the GDS variable encapsulating                   
    the ACTLU (note that the supported/not supported settings are               
    defined opposite to each other in the BIND and in the CV X'30');            
                                                                                
to:                                                                             
                                                                                
  - if the BIND is unextended set the ASP indicator off;                        
                                                                                
  - if the BIND is extended set the ASP indicator to the same value as          
    the REX stage pacing parameter (byte 4, bit 0) in the Assign LU             
    Characteristics (X'30') control vector included in the GDS variable         
    encapsulating the ACTLU (note that the supported/not supported              
    settings are defined opposite to each other in the BIND and in the          
    CV X'30');